Abit IS7 Bios 13
Abit IS7 Bios 13 Driver Description
367 KB / Windows All
# New Fixes / FeaturesAdded support for IS7-G, IS7, and IS7-E.
# Updated CPU micro code (CPU: 0F29H, ID=11H).
# Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412MHz.
# Revised setup menu for OnChip Serial ATA.
# Fixed on-chip SATA boot issue while another bootable hard drives exist and attached to IDE-1 or IDE-2.
# Updated memory reference code and ICH5 BIOS spec to v1.2.
# Fixed PS / 2 mouse malfunctioning problem while the USB cable of Media XP attached to mainboard.
# Fixed DOS 6.22 booting failure from FAT16 partition.
# Fixed BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when CPU FanEQ 60% enabled.
# Revised the following default settings in BIOS setup page. - Bootable Add-in Device: PCI Slot Device - CPU FanEQ Active Temperature: 70 C - CPU Warning Temperature: 85 C
# Added 80, 85, and 90 degrees C into Shutdown Temperature.
# Enabled IDE Block Mode and hided the option.
# Revised ICH5R RAID BIOS display issue.
# Revised power-on delay time from 4~5 seconds to 1~2 seconds after AC power lost and resumed.
# Added description for Bootable Add-in Device.
# Fixed the problem that NB fan still reports full speed in PC Health page when CPU FanEQ Speed Control is enabled.
# Added new option IDE Bus Master.
# Added description for Shutdown when CPUFAN Fail.
# Revised the wording of IDE channels inside the BIOS Setup. IDE Channel 0, 1, 2, and 3 are changed to 1, 2, 3, and 4.
# Added new option SATA RAID ROM to setup both OnBoard SATA and OnChip SATA.
# Added new option HDD Change Message in Advanced BIOS Features and the default setting is Disabled. If this option is changed to Enabled,the system will show warning message and prompt for a confirmation whenone or more than one HDD had been added into or removed from the system.
# Fixed CPU THRM-Throttling function.
# Added new options Refresh Cycle Time, Read Delay Adjust (tRD Adj), and Command Per Clock (CPC).
# Changed the default setting of Drive A from None to 1.44M after Load Fail-safe Defaults.
# Changed the default setting of OnCip Serial ATA to Auto.
# Added Game Accelerator technology.
# Revised the error reading of fan speed for specific CPU cooling fan when FanEQ 60% enabled.
# Fixed the slow detection problem when HDD simulation card installed.
# Fixed the problem that SMARTDRV.EXE malfunction in DOS 6.22 environment.
# Fixed the problem that Windows 98 bootable floppy disk causes system hang up during loading CD-ROM driver when OnChip Serial ATA is set toAuto or Enhanced Mode.
# Removed the option Force Update ESCD.
# BIOS Compile Date: 6 / 10 / 2003.
Specifications:
The IS7 series of boards uses the true Intel tested 865PE chipset for Hyper-Threading Pentium processors. Like the IC7 series it comes with, Dual DDR 400, AGP 8X, IEEE 1394a and SoftMenu Technology but only one set of SATA RAID connectors. Using the groundbreaking Hyper Threading Technology and gushing with extra capacity and peripherals support as well as first class onboard sound, this board makes for an easily deployed system in the home or office.
Enhanced 800MHz FSB
The 800MHz FSB increases bandwidth and improves overall system performance.
Serial ATA 150MB / s data transfer rate
Serial ATA is an evolutionary replacement for the Parallel ATA storage interface. This new high-speed interface boosts data transfer rates to up to 150 MB / sec. More flexible power tolerances allow for smaller and more efficient cables.
6-Channel Audio and S / PDIF Out interface
Lets you enjoy 6-channel audio without having to buy advanced sound cards.
USB 2.0 Supports 480MB / s data transfer rate
Supports speeds up to 480 Mb / sec, approximately forty times faster than conventional USB 1.1
ABIT SoftMenu Overclocking
The overclocking function includes CPU frequency, multiplier, CPU Vcore, memory voltage and AGP voltage adjustment available to maximize your system performance.
Driver Abit IS7 Bios 13 Reviews
Sorry,no review of Abit IS7 Bios 13
Download Asus N81Vg Notebook Suyin CN1316 Camera Driver 6.5801.22.006
Abit IS7 Bios 13 Download
Abit IS7 Bios 13 Keywords
abit kt7 bios bios abit bd7 ABIT NF8 bios abit is7 Bios 6.00 bios abit is-10 abit nf8-v2 bios IS7 ABIT BIOS bios abit is7 abit nf8-v2 bios sg.f rum abit ai7 bios
Bookmark Abit IS7 Bios 13
Related Drivers downloads for Abit IS7 Bios 13
1. Update CPU micro code. 2. Please use AFU408P.EXE flash tool. 3. BIOS compiled date: 09 / 12 / 2007....
BIOS Update: 1. Supports Intel Celeron 4X0 series CPUs.2. AMI BIOS Flash tool can flash BIOS directly.3. Compatible with AFU480P.EXE flash tool only!4. BIOS release date: 08 / 22 / 2007Motherboard Specs: CPU * LGA775 Socket for Intel® Core 2 Duo / Pentium Dual-Core / Pentium D / Pentium 4 ...
1. Fixed the unable to enter OS then not insert PS2 Keyboard.2. BIOS compiled date: 11 / 08 / 2007....
The SG-72 offers an ideal µATX Intel Pentium 4 platform for the value-conscious user. Based on the SIS 661FX chipset, the SG-72 delivers functionality found on premium Pentium 4 motherboards, including Dual DDR 400 support, 6-channel audio, Intel Hyper-Threading™ support, and an integrated SiS® Real...
1. Fixed the problem that the hard disk on IDE-1 may not be detected by when OnChip SATA is set to RAID. 2. Fixed the problem that CAS latency can not be set manually when the CPU: DRAM is set to PSB800 / 5:4 or PSB800 / 3:2. 3. Remove some string in PnP / PCI Configuration. 4. Fixed the probl... Abit IS7 Bios 13
1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS. 2. Added Pentium 4 Extreme Edition support. 3. Disabled Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software. 4. Fixed the problem where the BIOS will show the string AGP / P...
Fixes:Update CPU Micro code to support Athlon 4X50 series and Sempron X2 CPU....
1. Update CPU Micro Code. 2. Add new options 80? / 85? / 90? in CPU Shutdown Temperature. 3. Change the default setting of CPU Shutdown Temperature to 85?. 4. BIOS compile date: 07 / 22 / 2003....
1. Add High Performance option in Load Optimized Defaults. High Performance option will use critical DDR memory timing settings to achieve high system performance, nevertheless, it may deviate the original settings from module SPD and cause system instability. 2. HPT 37x BIOS version 2.0.1024.The...
Abit IS7 Bios 13 Related Drivers
BIOS update: Support PMC BIOS ROM....
Worldwide Patent - ASRock A.G.I. 8XA gift for VGA upgrade on i845GV FSB 533 / 400MHz, DDR 333 / 266 Supports Hyper-Threading Technology Integrated Intel Extreme Graphics ASROCK I / O - default 4 ready-to-use USB2.0 ports on rear panel, default Game / MIDI port. 5.1 Channel audio. default 10 / 100 Et...
1. Dual Intel 64-bit Xeon Support, up to 3.80 GHz, 800 MHz FSB 2. Intel E7520 (Lindenhurst) Chipset 3. Up to 16GB DDR2 400 SDRAM 4. Intel 82546GB Dual-port Gigabit Ethernet Controller 5. Adaptec AIC-7902 Dual Channel Ultra320 SCSI 6...
Initial BIOS.Specifications:Socket LGA 775Supports Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D / Celeron 400 Series ProcessorSupports FSB 533 / 800 / 1066MHzSupport Intel Hyper-Threading TechnologyDue to the chipset limitation, the actual memory size may be less than 4GB for the reservation...
BIOS Update:-Updated MICRO-CODE 0F49h-Fixed DMI information...
BIOS Update: Support for disty model... Abit IS7 Bios 13
Change onboard VGA Rom.Specifications:Socket LGA 775Supports Intel Pentium 4 / Celeron D ProcessorSupports FSB 800MHzSupport Intel Hyper-Threading TechnologyMEMORY# Support DDR 333 / 400 MHz# 2 x DDR DIMM Memory Slot# Max. Supports up to 2GB Memory# EXPANSION SLOT1 x CNR Slots# 1 x AGP 8X Slots# 3 x...
Features:Socket 478 for Intel Pentium 4 / Celeron D (Prescott, Northwood, Willamate) processors Intel 865G Chipset FSB800 / 533MHz processor, and H-T Technology Supports Dual Channel DDR400 (DDR x 2 DIMMs) Untied Overclocking : During Overclocking, FSB enjoys better margin due to fixed AGP / PCI ...